Showing posts with label Root. Show all posts
Showing posts with label Root. Show all posts

Monday, January 16

How to root Tecno W5 - Step by Step

How do I root a Tecno W5 Android phone? - The Tecno W5 is the lattest addition to the W Series an MT6737M powered Android phone running on Android 6 (Marshmallow), Follow the detailed guide provided bellow to root this awesome device. 


how to root tecno w5


    How To Root Tecno W5 Android phone?

  • Download TWRP for Tecno W5 ported by Team Hovatek at Here
  • Setup ADB and Fastboot on the PC using the guide at Here
  • Extract and copy the TWRP recovery.img into the same folder as the fastboot.exe and adb.exe 
  • Unlock the Bootloader of the Tecno W5 using the guide at Here
  • Download SuperSU 2.76.zip at Here
  • Copy SuperSU.zip to both the phone’s SD card and internal storage 
  • Connect the phone to the PC via USB cord while switched On and boot it into Fastboot (as instructed in the Bootloader unlock guide) 
  • When the phone enters Fastboot, flash the TWRP recovery image to the phone by typing the command below then pressing Enter

Code:
fastboot flash recovery recovery.img

  • Once recovery is flashed in fastboot, hold the Volume up + Power button and don’t release till the phone reboots into recovery 
  • In TWRP, if you get a prompt asking you to swipe to allow modification of the System partition, tap KEEP READ ONLY 
  • If TWRP offers to root the phone, select NO 
  • In TWRP recovery, tap Install 
  • Navigate to the location of the SuperSU2.76.zip and select it 
  • Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete 
  • Reboot the phone normally 
  • Confirm Root by installing and running Root Checker @ Here

Wednesday, January 11

How to Root Tecno W4 - Very Simple

How to Root Tecno W4 - Tecno W4 was the first Tecno phone to ship with Android 6.0 (Marshmallow) out of the box. We’d compared the Tecno W4 to some other Tecno phones on the W series, so head over to Tecno W2 vs Tecno W3 vs Tecno W4 vs Tecno W5 for the comparison. If the latest version of Kingroot doesn’t work for you, follow the step by step guide provided in this post.



How do I root the Tecno W4?


How do I root the Tecno W4?


1.Install VCOM drivers on your PC using Here

2.Download SuperSU 2.66.zip Here

3.Copy SuperSU.zip to both the phone’s SD card and internal storage

4.Download TWRP for Tecno W4  Here

5.Switch off the phone (still with battery inside)


Read:
Full Guide On How To Unbrick a Bricked Tecno W4


6.Flash the TWRP recovery.img to the phone using SP Flash tool Here

7.Boot the phone into recovery mode using Volume up button + Power button

8.In TWRP, if you get a prompt asking you to swipe to allow TWRP modify the system partition then go ahead and swipe. To swipe, place your finger on the green circle then slide it to the right

10.In TWRP recovery, tap Install

11.Navigate to the location of the SuperSU.zip and select it

12.Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete

13.Reboot the phone normally

14. Finally Confirm Root by installing and running Root Checker Here

Sunday, December 18

How to root your Tecno W3 - Step by step guide

How to root your Tecno W3

Rooting your Tecno W3 wiill be a very simple thing to do if you follow the step by step guide provided in this post. The Tecno W3  runs on Android 6.0 Marshmallow one of androids latest OS, Rooting the 6.0 marshmallow is not an easy thing to do because of google google latest security upgrades, all thanks to hovatek though for making this posible

Requirements to root Tecno W3


▪Download and install VCOM drivers on your PC see - Here


▪A SuperSU.Zip file - Here


▪A ported TWRP recovery for Tecno W3 - Here


▪Download Sp flash tool -Here

How to Root Tecno W3 


1. Copy the SuperSU.zip you just downloaded  to both the phone’s SD card and internal storage


2. Now switch off the phone


3. Next flash the TWRP recovery.img to the phone using this SP Flash tool guide


4. Boot the phone into recovery mode using Volume up button + Power button


5. If you get a prompt asking you to swipe to allow TWRP modify the system partition then go ahead and swipe. To swipe, place your finger on the green circle then slide it to the right


6. In TWRP recovery, tap Install


7. Navigate to the location of the SuperSU.zip and select it


8. Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete


9. Reboot the phone normally


You can confirm Root access by installing and running Root Checker. That’s all on how to root Tecno W3, I hope it works for you.

Merry Christmas 

Sunday, October 16

How to Root Tecno Boom J8 and instal CWM - working 100%


How to Root Tecno Boom J8 and instal CWM - working 100%


REQUIREMENTS

-Kingroot V4.9

-Recovery (Philiz touch ported by naw3r)

-Rashr#

-Supersu

-Es Explorer or Es Explorer root

DOWNLOAD TOOLS HERE

Rashr# and Es explorer can be found @ google play store.

How to Root Tecno Boom J8 and instal CWM 

INSTRUCTIONS

!!AT YOU OWN RISK!!

BEFORE FOLLOWING THIS GUIDE MAKE SURE YOU HAVE ENABLED DEVELOPERS OPTION BY TAPING ON ANDROID BUILD NUMBER SEVERAL TIMES, UNLOCK OEM AND ENABLE USB DEBUGGING.


How to Root Tecno Boom J8 and instal CWM - working 100%



1) Download and install kingroot. open kingroot, tap on ROOT and let it ROOT your phone.

2) It will say phones ROOTED but you will notice that superuser is not installed, now go to google play store, download and open Rashr#. the app will ask for root privileges grant it. choose recovery from storage and locate where the recovery.img file u downloaded earlier, when prompt with warning choosing recovery.img tap on yes and your phones recovery will be flashed successfully.

How to Root Tecno Boom J8 and instal CWM - working 100%


CRUCIAL PART AFTER ROOT

3)open Es Explorer root and navigate to the system folder, scroll down till you find recovery-from-boot.p.dis rename it to recovery-from-boot.p-bak.dis

4)open up Rashr# and tap on reboot to recovery, your device will now reboot into philis touch recovery.

5)in recovery you can use touch or the volume upand down keys to scroll, tap on install zip, Choose zip from sd card & locate supersu.zip tap on it to flash supersu and reboot your device.


How to Root Tecno Boom J8 and instal CWM - working 100%


FINAL IMAGE


How to Root Tecno Boom J8 and instal CWM - working 100%

ENJOY

Thursday, October 13

How to Root Tecno phantom 6 - Step by Step guide

Hi guys, bellow is a step by step guide on how to root the Tecno phantom 6, we have made it easy for you, all you need is comprehend and follow the steps for a successful root.
NOTE: The steps below on how to root the phantom 6 has been tested and proven, therefore ensure you follow its strictly for a successful root.
how to root the Tecno phantom 6

All thanks to Team Hovatek, for porting and deporting the rooting guides.

How to Root Tecno phantom 6 - Step by Step guide

Requirements
1. You will need absolute patience in following the steps below
2. A Twrp recovery image today we will use an image Ported by Team Hovatek (Download HERE)
3. A Super SU.zip (Download  HERE)
4. After downloading the above files, next is to Unlock the boot-loader of Tecno Phantom 6


How Can I Root Tecno Phantom 6?
1. Now copy the downloaded Super SU to both internal storage of your phone and SD card.

2. Next is to Setup ADB and Fastboot on the PC See guide HERE

3. When done with step 2 above, Extract and copy the twrp recovery.img into the same folder as the fastboot.exe and adb.exe

4. Then unlock Tecno Phantom 6 boot loader by following the steps HERE

5. Connect the phone to your PC via USB cord while switched ON and boot it into Fastboot (as instructed in the Bootloader unlock guide; remember to enable OEM unlocking and USB debugging)

6. The moment your device enters fast boot, flash the recovery.img to the phone by typing the command  fastboot boot recovery.img  then press Enter to execute command.

7. The device should automatically enter TWRP recovery mode
In TWRP, you may get a prompt asking you to swipe to allow modification of the System partition, ensure to tap (KEEP READ ONLY)

And if TWRP offers to root the phone, ensure to select NO
8. In TWRP recovery, tap Install
9. Navigate to the location of the SuperSU2.76.zip and select it
10. Now Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete
Reboot the phone normally.


Once you are done, confirm if your device has been successfully rooted by installing root checker.


Credit: TeamHovatek

Monday, August 8

How to root any sturborn phone with the latest kingroot v9.5

I bet you have always wanted to root that stubborn phone of yours or maybe that of your friend and you fail each time you try, you are not alone because many of our blog readers have complained of not being able to root their various MTK devices, or maybe you come here with one of this in mind
  • how to root android phone without computer
  • how to root android without computer
  • how to root android with computer
  • how to root android with app
  • how to root android 4.4.2 without computer
  • how to root android on mac
  • how to root android youtube
  • how to root android tablet

Well, you have come to the right place, below is a step by step guide for rooting stubborn phones with the latest kingroot v9.5.

You are not new to Kingroot as its one of the easiest and fastest way to root any android devices in less than 5Min. it has constantly been updated to root the latest model devices. Regardless of the kind of smartphone you are using, it is absolutely root-able with this latest version of Kingroot.The latest version of Kingroot version 9.5 will root some stubborn Android devices that are compatible with the app. If you’ve been unable to root your smartphone with the previous, I’ll suggest you try this latest version.

Where Can I Download it?
Download it here
PC users, download here


How to root stubborn phones

How to use KingRoot?

==>Run and install the downloadedKingRoot v4.9.5 on your device
==> After successful installation, start the application and wait for Kingroot to fully analyze your device, after a few seconds you will see the main window,
==>Click the Big Blue Circle on your device that says Root and wait for a few minutes (make sure you have a good internet connection).
==>Wait for the rooting to complete 100% after which King User app will be installed on your device.


To verify your root privileges, go to Playstore and download root checker>>>Install and run it and you should get a success message after then.


Note: If this version didn't work for you, you can always try out some of the oldest versions as they are still compatible with some phones.

Try it and let us know if it rooted your smartphone.

Sunday, August 7

How to root tecno camon C9 - in simple steps

Tweaking and rooting has become the other of the day for most Android users. from what i have heard, the Tecno C9 is a hard one but since all Android phones can be rooted, the the selfie king unveiled some couples of months ago won't be an exception likely in light of the fact that it's running on Android 6.0 Marshmallow. Be that as it may, we thank Hovatek Team for making this possible.

Requirements
1.You will need Absolute patience in following the steps involved in this guide
2.For the CWM recovery image Ported by team hovatek (download here)
3. For the Super SU.zip (download it here)
4. Unlocking the boot-loader of Tecno Camon C9

How Can I Root Tecno Camon C9?

how to root camon c9

1. Copy/ transfer the Super SU you downloaded to both internal storage of your phone and SD card.
2. Now you will have to Extract and copy the CWM recovery.img into the same folder as the fastboot.exe and adb.exe
3. Follow the steps in the link provided below to Unlock Tecno Camon C9 bootloader (http://www.tecnomobiles.com/2016/08/how-to-unlock-bootloader-of-tecno-camon_9.html)
4.next is to Connect the phone to your PC with the help of your USB cord while your phone is switched ON and boot it into Fastboot (as instructed in the Bootloader unlock guide)
5. The moment your device enters fast boot, flash the recovery.img to the phone by typing the command below then pressing Enter fastboot
flash recovery recovery.img
6. Reboot the phone by typing the command below then pressing Enter
fastboot reboot
7. Boot the phone into recovery mode by switching off and using Volume up button + Power button
8. Once you enter recovery mode, use the volume button to move up and down
9. Scroll down to Install zip and select it
10. Select Choose zip from /storage/sdcard1
11. Navigate to the location of SuperSu.zip and select it
12. Select Yes – Install SuperSU to confirm flashing
Wait till the flashing is complete…
13. Return to the home screen (using the back option) then select Reboot
If CWM offers to fix some errors, select No.
Once you are done, confirm if your device has been successfully rooted by installing root checker.

Let us know if you successfully rooted your Tecno Camon C9.
Credit; Team Hovatek